Back to Guides
Energy Saving

Get your free quote

Free, no obligation. Compare quotes from local installers.

Save half your Eskom bill with this free guide - cheapest fixes first, solar last.

Geyser + standby waste is ~40% of a typical SA bill. Kill it first (R0), add a heat pump or solar geyser next (small spend), and solar last - done in that order, halving your bill is realistic, not a slogan.
Get your free assessment →

Takes 2 minutes · No obligation · free, no-obligation quotes

15 min read
Step-by-step roadmap to an energy-efficient, energy-independent South African home

Most South Africans buy solar backwards. They see a scary Eskom bill, panic, and drop R150,000 on the biggest system a salesman will sell them - sized to power all the waste they never fixed. Then they wonder why the payback takes forever. This guide does it in the right order: the cheapest, highest-return moves first, and the big solar purchase last - by which point your bill is already smaller and the system you need is smaller (and cheaper) too. Seven steps. Follow them in order. You can start today for almost nothing.

The 7 steps, in order

  1. Plug the leaky bucket - geyser timer, blanket, LEDs, standby loads, draughts.
  2. Fix water heating - your single biggest load. Heat pump vs solar geyser vs PV diverter.
  3. Cooking, heating & the building envelope - gas, induction, insulation.
  4. Backup vs generation - inverter + battery first, solar PV second.
  5. Right-size your solar - off your NOW-reduced bill, so you don’t overspend.
  6. Finance & incentives - Section 12B, R0-upfront options, honest payback maths.
  7. Get it installed right - CoC, a quality partner, warranties, no cowboys.

One rule runs through all seven: every rand of waste you remove first is a rand you never have to pay a solar system to replace. Cut before you generate. Here’s exactly how.

Step 1 - Plug the leaky bucket

Before you buy anything big, stop paying for electricity you’re throwing away. In a typical South African home the geyser is 30-40% of the entire bill - so this is where the fast money is. None of the moves below need an electrician’s callout for most homes, and together they usually cost under R2,000 in parts.

  • Fit a geyser timer. A Geyserwise timer (a local SA staple) heats water only in the windows you actually use it, instead of reheating around the clock. Heating a 200L geyser only morning and evening rather than 24/7 is one of the highest-return rands you can spend on your home.
  • Add a geyser blanket and lag the hot pipes. A R300-R600 insulation blanket cuts standing heat loss so your element switches on less often. Cheap, boring, effective.
  • Swap every bulb to LED. An LED uses roughly 80-90% less power than the old incandescent it replaces and lasts years longer. Do the whole house in one afternoon.
  • Kill standby / vampire loads. TVs, decoders, gaming consoles, chargers and the microwave clock quietly draw power 24/7 - commonly cited as around 5-10% of a household’s electricity. Put the entertainment unit and home office on switched multi-plugs and turn them off at the wall.
  • Draught-proof. Seal gaps under doors and around windows. You stop paying to heat air that leaks straight outside - it makes every heating rand in winter go further.

Why this is Step 1, not Step 5: these moves shrink your bill immediately and cost almost nothing. They also shrink the solar system you’ll eventually buy. Skip them and you’ll pay a solar installer to generate power for a geyser that never needed to run 24 hours a day. That’s the most expensive way to heat water in the country.

Know your power-hogs: what each appliance really costs per month

Before you fix anything, know where the money actually goes. EnergyBee’s appliance running-cost ranking priced the seven biggest loads in a winter household of four at a blended R3.20 per kWh (Eskom direct customers pay a little less; many municipal customers more) - and the ranking barely changes from home to home:

AppliancePowerTypical useCost/month @ R3.20
Geyser (electric)~3 kWHeats water 24/7R900
Pool pump~1.1 kW8 hrs/day, year-roundR845
Electric heaters~2 kW each4 hrs/eveningR770
Fridge + chest freezer~150 W avgAlways onR290
Tumble dryer~3 kW4-5 loads/weekR200
Oven & stove~2-3 kWDaily cookingR120
Kettle~2 kW6+ boils/dayR100

Figures per EnergyBee’s appliance running-cost ranking (June 2026), winter family of four at a blended R3.20/kWh. Your exact cost depends on your tariff and how heavily you use each appliance - but the ranking barely changes from home to home.

The top three alone are typically 70%+ of the bill - and two of them get overlooked. If you have a pool, the pump is probably your second-biggest user: a 1.1kW motor running 8 hours a day costs around R845 a month, year-round. Cut the run-time (4-5 hours is plenty when the pool isn’t being used) and switch to a variable-speed pump, which uses up to 80% less power than an old single-speed motor. And watch the heaters: a single 2kW bar heater running four hours an evening adds about R770. Heat the person, not the house - an electric blanket costs cents per night, and a reverse-cycle air-con unit delivers around 3kW of heat for every 1kW of electricity.

How much electricity does a fridge use?

The nameplate on a domestic fridge-freezer says 100-250 watts - but that’s the running draw while the compressor is actually working. A fridge cycles, so the number that matters for your bill is the much lower average draw: roughly 40-60W for a modern A-rated 300L unit, 80-120W for an older or larger one, and 100-150W for an American-style side-by-side. Across a month:

  • A modern, efficient fridge-freezer: around 30-45 units (kWh) a month.
  • An older or larger model: around 60-90 units a month.
  • A big American-style side-by-side: often 90-120+ units a month.

At the 2026 metro tariff of roughly R4.17 per unit (eThekwini’s published Durban rate), that’s about R125-R190 a month for an efficient fridge and R250-R400 for a thirsty old one. A fridge’s wattage is modest next to a 3kW geyser element, but it runs every hour of every day of its life - which is why it lands at roughly 10-15% of a typical household bill, consistently among the top three or four appliances by annual cost.

Check the garage. The old “beer fridge” or chest freezer on the stoep is often the most inefficient appliance on the property: it’s ten or fifteen years old (using two to three times the electricity of a modern unit), it sits in a hot spot so the compressor works harder, and it runs 24/7 for the handful of times a week you open it. A second fridge or freezer can add 50-90 units a month - R200-R375, or R2,400-R4,500 a year. Switching off a rarely-used one is one of the fastest, completely free cuts you can make. For the main fridge: set it to 3-5°C (freezer -18°C), leave a gap behind it so the coils can shed heat, and check the door seals.

What a tumble dryer really costs per load

A vented or condenser dryer draws 2-2.7 kW while its heating element is on - in the same league as a bar heater or a kettle, and close to a geyser element. A full load uses roughly 2.5-4.5 units, which at the ~R4.17/kWh metro rate is about R10-R19 per load. A busy household drying five or six loads a week through a wet winter can easily add R300-R450 a month - and almost none of that shows up in summer, when the washing goes on the line.

  • Line-dry or rack-dry whenever the weather allows. Every load you keep off the dryer is R10-R19 back in your pocket - and even a partial line-dry before a quick 20-minute finish saves most of the cost.
  • Spin faster before you dry. Spinning at 1,200-1,600 rpm instead of 800 wrings out more water and can cut dryer time - and cost - by a fifth or more.
  • Only dry full loads, and clean the lint filter every time. A clogged filter makes the element run longer for the same result.
  • Consider a heat-pump dryer. It recycles its own warm air instead of venting it, pulling roughly 500-900W and doing the same job on 1-1.5 units - about R4-R6 a load, roughly a third of the running cost. It pays for itself fast in a household that dries several loads a week.

Not sure how this applies to your home? A free EnergyBee assessment looks at your actual bill, appliances and roof, and tells you exactly which step will save you the most - no obligation, no sales pressure.

Find my biggest quick win →

Step 2 - Fix water heating, your single biggest load

Once you’ve controlled when your geyser runs, decide how it heats. Water heating is the biggest single electricity load in most homes, so this is the biggest structural saving available before you touch generation. Three routes, and the right one depends on your home:

OptionHow it worksBest for
Heat pumpMoves heat from the air into the water - uses roughly a third of the electricity of an element for the same hot water.Bigger households, high hot-water use, works day or night and in cold weather (Highveld winters included).
Solar geyser (thermal)Roof collector heats the water directly from the sun. Almost free hot water on sunny days.Sunny inland regions, homes with good north-facing roof space and predictable daytime sun.
PV geyser optimiser / diverterSends spare power from solar PV panels into your existing electric geyser instead of exporting it.Homes already going solar PV - squeezes free hot water out of midday surplus with no new geyser.

Location and climate matter. A solar thermal geyser is brilliant in sunny, frost-light areas but underperforms through a grey, wet Cape winter - where a heat pump keeps delivering. A heat pump works everywhere but costs more upfront. If you’re already installing solar PV, a diverter can be the cheapest win of all because it uses hardware you’re buying anyway.

Don’t guess. Read the full heat pump vs solar geyser vs gas comparison, then let the assessment match the option to your household and climate.

Not sure how this applies to your home? A free EnergyBee assessment looks at your actual bill, appliances and roof, and tells you exactly which step will save you the most - no obligation, no sales pressure.

Match my water heating →

Step 3 - Cooking, heating & the building envelope

With the geyser handled, tackle the next cluster of loads - and the fabric of the house itself. These are cheap rand-per-degree wins that make everything downstream (including your solar system) smaller.

  • Cooking: gas hob vs induction. A gas hob takes cooking off the grid entirely, which helps during load-shedding and flattens your peak demand. Induction is faster and far more efficient than an old resistive plate if you’d rather stay electric. Either beats a coil stove.
  • Space heating: stop heating with resistance. Bar heaters and oil heaters are electricity-guzzlers. If you must heat electrically, an efficient reverse-cycle (air-con) unit delivers far more warmth per rand. Better still, fix the envelope so you need less heat at all.
  • Ceiling insulation is the best rand-per-degree buy in the house. A properly insulated ceiling (products like Aerolite or Isotherm) keeps heat in during winter and out during summer, cutting both your heating and cooling load. It pays back quietly, every season, for the life of the home.

Why before solar: insulation and efficient cooking/heating shave your peak and your total consumption. Lower peak and lower total both mean a smaller inverter and fewer panels later. You’re still spending on the house, not on generation you don’t need yet.

Not sure how this applies to your home? A free EnergyBee assessment looks at your actual bill, appliances and roof, and tells you exactly which step will save you the most - no obligation, no sales pressure.

See where money leaks →

Step 4 - Backup vs generation: get the order right

Now - and only now - comes hardware that makes or stores power. People conflate two very different jobs here, and buying them in the wrong order wastes money:

  • Backup = an inverter + battery. This keeps your lights, Wi-Fi, fridge and plugs alive through load-shedding. It does not lower your bill on its own - you’re still buying grid power to charge it. Its job is keeping the lights on. Size for surge loads too: a fridge compressor briefly pulls 600-1,200W each time it kicks in, which any decent hybrid inverter shrugs off - but it’s worth knowing when you’re matching a battery to your night load.
  • Generation = solar PV panels. This is what actually makes your own power and cuts the bill. Panels feed your loads by day and charge the battery for night.

The right order: if load-shedding is your pain, a hybrid inverter + battery solves it first - and a hybrid inverter (Sunsynk, Deye, FoxESS and Luxpower are common SA choices) is built to add panels later without replacing the core. So you can buy backup now and bolt on generation when the budget allows, without throwing anything away. If your pain is purely the bill, panels do more. Most SA homes end up wanting both - which is exactly why you buy a hybrid-ready inverter and a battery you can expand.

Work through the trade-offs in the backup power guide and the hybrid vs battery inverter comparison.

Not sure how this applies to your home? A free EnergyBee assessment looks at your actual bill, appliances and roof, and tells you exactly which step will save you the most - no obligation, no sales pressure.

Backup vs generation →

Step 5 - Right-size your solar (don’t oversize)

Here’s the payoff for doing Steps 1-4 first. You size your solar system off your reduced bill - not the bloated one you started with. This is the step that saves the most money, because oversizing is the number-one way South Africans overspend on solar.

  • Size off your NOW consumption. Use your last few months of usage afterthe efficiency fixes - not last summer’s peak. A home that’s cut its geyser and standby waste may need a noticeably smaller inverter and battery than it would have before.
  • Don’t buy for the one day a year. Sizing for the absolute worst-case cloudy fortnight means paying for capacity that sits idle 350 days a year. Size for your normal, keep a sensible margin, stay grid-tied for the rare extreme.
  • Match the battery to your night load, not to a round marketing number. Local batteries - Freedom Won, Hubble, Pylontech, Dyness, BYD - come in modular sizes; buy what your evenings actually use and expand later if needed.

The tighter your sizing, the shorter your payback. Start with the inverter sizing guide, then have the assessment size it against your real, post-efficiency numbers.

Not sure how this applies to your home? A free EnergyBee assessment looks at your actual bill, appliances and roof, and tells you exactly which step will save you the most - no obligation, no sales pressure.

Right-size my system →

Step 6 - Finance & incentives

Now that you know the right-sized system, fund it in the cheapest honest way. Two levers matter most in South Africa:

  • Section 12B. Businesses (and many landlords / sole proprietors with qualifying income) can deduct the cost of a renewable-energy system against taxable income under Section 12B. It doesn’t apply to every household, but where it does, it materially changes the maths. See the Section 12B guide for who qualifies and real rand examples.
  • R0-upfront finance, rent-to-own and subscriptions. If a cash purchase is off the table, subscription and rent-to-own routes let you start saving without a big deposit - you trade a lower upfront cost for a monthly fee. Compare the true cost of each in the solar financing guide.
  • Do the honest payback maths. A right-sized system on a reduced bill pays back faster than an oversized one on a bloated bill - which is the whole point of doing the steps in order. Be wary of any quote that only shows you the monthly saving and never the years-to-payback.

Numbers here depend on your tariff, municipality and system, so treat any single figure with suspicion. The assessment runs the payback on your inputs.

Not sure how this applies to your home? A free EnergyBee assessment looks at your actual bill, appliances and roof, and tells you exactly which step will save you the most - no obligation, no sales pressure.

See my finance payback →

Step 7 - Get it installed right

The best-sized, best-financed system will still burn you if it’s installed by a cowboy. The final step is protecting the investment:

  • Insist on a Certificate of Compliance (CoC). A legal, safe install must be signed off. No CoC means no insurance cover, trouble when you sell, and real safety risk. Non-negotiable.
  • Choose a quality install partner. Check registrations, references, and photos of real past jobs. Get more than one quote so you can compare scope, not just price.
  • Understand the warranties. Panels, inverter and battery each carry different warranty terms - know what’s covered, for how long, and who honours it if a brand’s local agent changes. Keep every invoice and the CoC together; a buyer or bond originator will want them.
  • Avoid the cowboys. Walk away from cash-only, no-paperwork, “we can start tomorrow” pressure. A quality installer books you in, quotes in writing and stands behind the CoC.

This is where EnergyBee comes in: we introduce you to up to three installers so you can compare quotes, and you can hold that installer to the checks above. And because you’ve followed Steps 1-6, you walk in knowing exactly what you need - you can’t be upsold into an oversized system you don’t want.

Savings figures on this page are typical illustrative ranges - your actual numbers depend on your home, tariff, municipality and usage. The free assessment replaces the estimates above with figures calculated from your own bill.